Image Caption

Conveyor Components

Continental is the world leader in conveyors and conveyor technology. Continental belt conveyor components move more material, in more places, than any other brand of belt conveyor components.

Industry professionals choose Continental because they know it’s the total life-cycle costs that count. They choose Continental because they want to maximize uptime, availability and avoid unexpected maintenance and labor costs.

Conveyor Components

Idlers

Continental® offers and variety of idler styles and designs, from light duty CEMA B idlers to extra heavy-duty CEMA F class idlers. Please select the category below:


Super B

The B-Ball Bearing Series is built to give you an economical conveyor idler for light to moderate duty service. Marketing and technical support is provided from our Winfield, Alabama, headquarters. In addition, the company maintains sales and service representatives worldwide and stocking distributors throughout the United States

20° or 35° Trough Angle

B-Ball Bearing Series idlers are offered with either 20° or 35° trough angle. The 35° units are recommended for high volume materials of uniform size such as wood chips, where it is advantageous to handle a greater volume on the same belt width.

4" and 5" Diameter Rolls

The 4" and 5" diameter rolls are of one-piece construction with factory sealed ball bearings for permanent roll lubrication. The rolls are fitted at either end with deep groove, high capacity, precision ball bearings, having a flexible lip type seal and a steel shield toward the inside of the roll. To further protect the bearing assembly from dirt and damage, a shield is pressed on the shaft outside the bearing. The solid 17mm shaft provides strength and the small moment arm minimizes shaft slope at bearing which increases bearing life.

Replaceable Bearings/Removable Rolls

The roll assemblies are secured at each end by a horseshoe-shaped, spring steel clip which engages milled slots in the shaft. The clips are easily removed if bearing replacement is necessary. Rolls are secured in the frame assembly by special clips providing a rigid, one-piece unit, yet allowing easy roll removal when necessary.

Rigid End and Center Stands

End and center stands are die formed from steel plate, and end stands are channel formed for greater rigidity. Stands and foot plates are fixture-welded to the self-cleaning inverted base angle, assuring accurate roll alignment.

In addition to 20° and 35° troughing idlers, a complete line of idlers, including 5" diameter rubber disc returns, is available. These have the same design features described above.

Super B Series

Super B, CEMA B Catalog


HC Series

The HC™ Series roll from Continental® is produced using proprietary manufacturing techniques. State-of-the-art assembly methods allow Continental® to adjust the bearing endplay setting to precise engineered specifications. These proprietary methods provide absolute consistency roll-to-roll. In addition, the ¾" tapered roller bearing provides twice the L10 life of ball bearings. The advanced five-stage seal design ensures long-life operation without re-lubrication.

Now you can move up to the durability of tapered roller bearing, idler roll technology without sacrificing your budget. HC™ idlers are available from stock at authorized Continental® distributors and factory warehouses. With the new HC™ Idler you will never have to settle for CEMA C ball bearing rolls again.

Modified Geometry Tapered Roller Bearing

Automotive class line contact tapered roller bearings provide more bearing contact area than ball bearings, spreading the load over a larger area. This relieves stress and enhances bearing life under heavy loads and impact.

 

HC Series

HC Series, CEMA C/D


HD Series

The HD™ Series roll from Continental is produced using proven, proprietary manufacturing techniques. State-of-the-art assembly methods allow Continental to adjust the bearing endplay setting to precise engineered specifications. These proprietary methods provide absolute consistency roll-to-roll.

In addition, the ¾” tapered roller bearing and end-pointed shaft provide increased load capacity, as compared to other CEMA D idler rolls. In addition, the ¾" tapered roller bearing provides twice the L10 life of ball bearings. The advanced five-stage seal design ensures long-life operation without re-lubrication.

Modified Geometry Tapered Roller Bearing

Automotive class line contact tapered roller bearings provide more bearing contact area than ball bearings, spreading the load over a larger area. This relieves stress and enhances bearing life under heavy loads and impact.

HD Series Idler


H-Plus Series

The Continental Conveyor H-Plus™ Idler Series has been the industry standard for many years. It has proved to be extremely durable in the toughest field conditions and under the most grueling of laboratory tests. The proprietary design and construction of the H-Plus™ Series provides the conveyor owner and operator with unparalleled value and extended periods of trouble-free service. The H-Plus™ Idler Series provides one of the best available investments in conveying equipment available to the market today.

The H-Plus™ is a heavy duty, precision idler meeting CEMA D requirements and ideal for today's higher capacity applications.

H-Plus™ Idlers are offered in both in-line and offset configurations, from 18" belt width, in 20°, 35°, and 45° troughing angles with 4", 5", and 6" diameter rolls. Sealed and regreasable designs are available. In addition to the styles shown here, garland idlers, adjustable transition troughing and adjustable impact troughing idlers, "V" return idlers, urethane, neoprene, and ceramic disc returns, removable end bracket idlers and specially reinforced impact frames for unusual and severe applications are available.

Idler frames are jig welded for accuracy with formed end brackets and inverted cross angles of high strength steel. The universal foot provides maximum mounting flexibility for both new and existing installations. Rolls are interchangeable and secured to the frame with a steel retainer.

H-Plus, CEMA D

H-Plus, CEMA D

 

HX Series

The Continental HX Series Idlers are available for CEMA D and CEMA E applications. Available with "open" or "2RS factory sealed" bearings, HX idler rolls are available in a wide range of application-specific bearing and seal designs.

Features of the HX Series Idlers are:

  • Deep-Groove ball bearing designed to exceed CEMA requirements for L10 life.
  • Counter-bored shell with protected weld ensures proper alignment.
  • The back seal allows for a larger grease reservoir for "open" bearing rolls.
  • The triple labyrinth seal retards lateral movement and provides a barrier to contaminants reaching the bearing.
  • Lip seal designed to provide added protection for the bearing.
  • A flinger employs the natural centrifugal forces generated by a rotating idler roll to redirect potential contaminants away from the bearing cavity.

SDX-Plus Series

The Continental Conveyor SDX-Plus Series CEMA E Rated, Super Duty Idler is, without a doubt, the ultimate in Super Duty design. The material for every component of this series has been selected without compromise and every part is machined to exacting tolerances. Simply, the SDX-Plus Series offers you the economics of unequalled reliability.

Continental SDX-Plus Series Idlers are offered from 36" belt widths in 20°, 35°, and 45° troughers with equal and extended center roll styles. Troughers are supplemented by rubber disc impacts, self-aligners, transitions, and returns of corresponding sizes in steel, rubber, and urethane discs. Both sealed and regreasable designs are available.

The SDX-Plus Idler Series is furnished with 6" or 7" diameter rolls equipped with 1¼" tapered roller bearings which provide generous load and thrust capacities. Its combination labyrinth and contact seal has proven to be far superior to the cartridge type or conventional labyrinth seal utilized in many so-called heavy duty idlers. A patented 1 3/4" diameter end pointed shaft is furnished on all return rolls and on 42 inch belt width and wider troughing rolls.

SDX-Plus Series, CEMA E

SDX-Plus Series, CEMA E


Pulleys

Continental offers an incredibly wide variety of options, sizes, and duty ranges in its extensive pulleys lines. Continental pulleys can be engineered for your specific application. A wide range of pulleys are available, from engineered-class to Continental JLV pulleys with end disc configurations that include: Mine-duty turbo disc, Engineered turbo disc, Heavy-Duty T-Bottom, and Dead shaft pulleys with internal bearings.

 

Continental JLV Pulleys

Continental JLV Pulleys


Impact Beds

The Continental Impact Bed extends belt life and reduces downtime by supporting the conveyor belt and cushioning it against the shock of heavy loads and impact. Its modular design allows multiple units to be closely fitted to form the bed length needed.

 

Impact Bed/Slide Seal

Impact Bed/Slide Seal


Slide Seal

The Continental slide seal is designed to fit into your loading area when there is a minimal impact. It is a simple and cost effective way to provide continuous support of your conveyor belt against the skirting material, resulting in a positive seal. By utilizing two standard troughing idler frames with center rolls and UHMW/steel support bars with support mounting brackets instead of wing rolls, this unit will provide a positive seal in your loading area with reduced belt drag.

 

Impact Bed/Slide Seal

Impact Bed/Slide Seal


Smart Trainer

Smart Trainer

The SmarTrainer™ from Continental is designed to reduce material buildup associated with most self-aligning return idlers. Complex frames normally associated with return trainers accumulate material between the roll and frame.

This accumulation of material can cause de-training and possible damage to the belt. The SmarTrainer™ is held in place by two simple brackets with no framework to collect material. Lubrication is easy and can be accomplished from either side.


 

 

Наши партнеры